Deploying your code

When it is time to deploy your code to the robot, connect to it via Wi-Fi or USB. Ensure to select the correct robot from the build menu:

Sloth Loads (if implemented) can be selected as well from this list.

You should see "REV Robotics Control Hub" (or similar) to the left of the selector box.

When it is time to deploy, press the green play button. The play button may also be a green "refresh" button, but it is the one to the left of the green bug.

Full Gradle builds can take upwards of a few minutes, which is why Sloth Loads are beneficial.

And remember, you can't press a button wrong.